1. Epoxy resin adhesive
2. High intensity of adhesion, excellent adhesive performance, especially to steel-steel, steel-concrete, at leading level in nation.
3. excellent performance of bearing aging, anti-corrode, and water proof resistant
4. Various products of solidify in normal temperature, low temperature, wet condition, fast, lower and normal speed solidification.

1. Bonded rebaring of new added rebars, rounded rebars and old fitment of concrete
2. bonded rebaring of various bearing and unbearing anchors with concrete and bricks and stones

rill a hole -> clear the hole-> clear up the rebars -> place the tube -> break to pieces and beat up -> insert rebars in spin -> fix the rebars temporary

1. Clear up the powders in the hole.
2. Remove the stains and rust on the rebars with steel-wire brush
3. Pull out the lid of the bigger tube before place into the hole.
4. Break the glass tube into pieces in counterclockwise, mix at least 30 seconds.
5. Insert the rebars in spin, to the bottom of the hole, and move up and down at least 5 times, and then knock the rebars lightly to make the surface get strong.
6. Before solidification, do not move the rebars.
7. Bonded rebars at the bottom surface of the concrete, put a three-ply board (with hole on it)on the mixing bars, in the case of the adhesive flowing out when mixing. After the rebars inserted, use quick-concretion adhesive.

1. This product is packaging with hard plastic box, every one has 25~40 glass tube, every layer has sponge mat.
2. do not hit, incline or invert, throwing in transportation, piled no more than 5 layers, not to be supposed the solarization, not get drenched by rain.
3. Located in ventilating dry place, far from the fire. storage temperature is 5℃~35℃.
4. Products are not virulently, flammable, and the easy explosive dangerous goods.
If splashes carelessly in the skin or clothes, may use the acetone or the ethyl alcohol clean immediately, splashes in the eye, please immediately goes seeing a doctor.