1. It is double components modified epoxy resin adhesive.
2. Low degree of viscosity, good fluid, strong penetration.
3. Operable time is long, solidified condition is loose.

1. Pouring, sealing, repairing for concrete's slits>0.1mm.
2. Pouring, sealing, repairing when it comes to air drum in marbles, granitites and tiles.
3. Sticking, sealing, besmearing, protecting and reinforcing for electronic elements or instruments.

1.Deal with the surface of the slits
2.Bury the pouring-adhesive mouth
3.Seal the slits
4.Mixed the pouring adhesive for wispy slit
5.Press in the pouring adhesive at low pressure and low speed

1. Clear out the circumjacent sundries and surface dust of the slits with the steel brush.
2. Bury a pouring-adhesive mouth every 150mm~300mm.
3. Press in at low pressure and low speed at 0.1~0.3MPa.
4. Stopping pushing until pushing more 2~3seconds after giving out adhesive from the next pouring-adhesive mouth.
5. Every time amount of mixed adhesive is not suitable for more than 3kg.
6. After using out every batch, clear out immediately the force pump, container with dilute solution, and mixed again after the dilute solution has been volatilize.

1. Pack with metal pail or plastic, 10kg, 20kg or packing under customers' request.
2. Products are not virulently, flammable, and the easy explosive dangerous goods. May use the general transportation vehicle to transport.
3. Located in ventilating dry place, far from the fire.
4. Does not invert, does not have incisive metal hit, not to be supposed the solarization, not get drenched by rain.
5. Date of storage: from the time of production, the storage time is a year. After a year it needs to be detected before using.
6. Construction to be supposed to wear goggles, gauze mask and glove and so on.
7. If splashes carelessly in the skin or clothes, may use the acetone or the ethyl alcohol clean immediately.