1. This product's solidified material is additive product of the polyamine and the polysulfide alcoholate, has the speciality at -10℃ of high active, high ring-opening Capability, making the bisphenol A epoxy resin solidified at -10℃ and still having upper adhesive tension.
2. The range of solidified mixed ration is large, operable time is long.
3. Good thixotropy, no flow in construction.
4. excellent performance of bearing aging, anti-corrode, and water proof resistant

1. Applied above -10℃ for projects of reinforcement and alteration, sticking the steel plates up to components of concrete and bricks and stones, bonding rebars.
2. Applied above -10℃ for bonded rebaring of various bearing and unbearable anchors with concrete and bricks and stones.
3. Applied above -10℃ for adhering to components of concrete, bricks and stones, woods, metals.

Clean up and polish the surface of concrete or armor plates
1.Compound Dazhu low temperature sticks the steel construction adhesive
2.Stick
3.Pressurize and fix with adhesive inner-expansion bolt or shooting nails
4.Antisepsis on the surface of armor plates

1. Clean up the surface of concrete until baring the new surface of sandy stone, clean up the surface of armor plates to roughness downright, clear the smeary spot with acetone.
2. Carry through experimentation for compounding the adhesive before using, in order to get the best mix ratio.
3. Must carry on mechanical churn up to make sure that component A and B mixed uniformity.
4. If the temperature is a bit low, can make the adhesive heated before mixed, making sure no water seep in.

1. Pack with metal pail or plastic, 10kg, 20kg or packing under customers' request.
2. May use the general transportation vehicle to transport.
3. Does not invert, does not have incisive metal hit, not to be supposed the solarization, not get drenched by rain.
4. Located in ventilating dry place, far from the fire. storage temperature is 5℃~35℃.
5. Products are not virulently, flammable, and the easy explosive dangerous goods.
6. Date of storage: from the time of production, the storage time is a year.
7. If splashes carelessly in the skin or clothes, may use the acetone or the ethyl alcohol clean immediately, splashes in the eye, please immediately goes seeing a doctor.
8. The fillings in this product may precipitate, but it doesn't affect the intensity of the adhesive.