1. This product's solidified material is additive product of the polyamine and the polysulfide alcoholate, has the speciality at -10℃ of high active, high ring-opening Capability, making the bisphenol A epoxy resin solidified at -10℃ and still having upper adhesive tension.
2. The range of solidified mixed ration is large, operable time is long.
3. Good thixotropy, no flow in construction.
4. excellent performance of bearing aging, anti-corrode, and water proof resistant

1. Applied above -10℃ for projects of reinforcement and alteration, sticking the steel plates up to components of concrete and bricks and stones, bonding rebars.
2. Applied above -10℃ for bonded rebaring of various bearing and unbearable anchors with concrete and bricks and stones.
3. Applied above -10℃ for adhering to components of concrete, bricks and stones, woods, metals.

Clean up and polish the surface of concrete or armor plates
Fix tightly the armor plates with inner-expansion bolts
Full weld with armor plates
Airproofed all slits and holes by airproofing adhesive
Compound Dazhu pouring adhesive
Press in the pouring adhesive at low pressure and low speed
Antisepsis on the surface of armor plates

1. Clear and polish thoroughly concrete and armor plate.
2. Make up the adhesive by experimentation before using, in order to get the best mix ratio.
3. Pressing in at low pressure and speed is necessary, and knock the armor plate with timberen hammer while pouring.
4. drilling 2 holes (one for exhaust) to repair when it appears gaul.
5. Do not impact the armor plates within 2 days after construction.
6. Do not get the adhesive mixed surpassing 3kg in every one time, clean immediately out the pushing -adhesive jug with dilute solution when finishing, and mixed again after the dilute solution has been volatilize. If use air-pressure equipment, can get a bit more adhesive mixed.

1. Pack with metal pail or plastic, 10kg, 20kg or packing under customers' request.
2. May use the general transportation vehicle to transport.
3. Does not invert, does not have incisive metal hit, not to be supposed the solarization, not get drenched by rain.
4. Located in ventilating dry place, far from the fire. storage temperature is 5℃~35℃.
5. Products are not virulently, flammable, and the easy explosive dangerous goods.
6. Date of storage: from the time of production, the storage time is a year.
7. If splashes carelessly in the skin or clothes, may use the acetone or the ethyl alcohol clean immediately.