1. This product can solidify in water or wet conditions; the technique is in leading lever national.
2. Can solidify in water, wet conditions, and dry place and at low temperature, having very high adhesive intensity and bearing aging.
3. The range of solidified mixed ration is large, operable time can be adjusted according to requires.
4. Good thixotropy, no flow in construction.
5. Easy operation, good working technique, can shorten the working period; reduce prices, remarkable technical economic benefits.
6. Can be made into stick-steel adhesive under water, pouring stick-steel adhesive under water, Carbon-fiber Special Adhesive under water and bonded rebars adhesive.

1. Stick the steel plates, carbon-fiber cloth to the concrete components and bond rebars in water or wet conditions.
2. Applied to glue and repair the flaws about the projects of dams, tunnels, water pipe, water pools, aqueducts, man-made protections, etc, in the water or wet conditions.
3. Applied broadly in civil engineering, metallurgy, smelt, mine mechanical conformation, mould sculpting, war industry, underneath cable, end-seal, protecting surface and civil use.

Clean up and polish the surface of concrete or armor plates
1.Compound Dazhu Wet Conditions (Under Water) Structural Adhesive
2.Stick
3.Pressurize and fix with adhesive inner-expansion bolt or shooting nails
4.Antisepsis on the surface of armor plates

1. Clean up the surface of concrete until baring the new surface of sandy stone, clean up the surface of armor plates to roughness downright, clear the smeary spot with acetone.
2. Carry through experimentation for compounding the adhesive before using, in order to get the best mix ratio.
3. Must carry on mechanical churn up to make sure that component A and B mixed uniformity.
4. If the temperature is a bit low, can make the adhesive heated before mixed, making sure no water seep in.

1. Pack with metal pail or plastic, 10kg, 20kg or packing under customers' request.
2. May use the general transportation vehicle to transport.
3. Does not invert, does not have incisive metal hit, not to be supposed the solarization, not get drenched by rain.
4. Located in ventilating dry place, far from the fire. storage temperature is 5℃~35℃.
5. Products are not virulently, flammable, and the easy explosive dangerous goods.
6. Date of storage: from the time of production, the storage time is a year.
7. If splashes carelessly in the skin or clothes, may use the acetone or the ethyl alcohol clean immediately.
8. The fillings in this product may precipitate, but it doesn't affect the intensity of the adhesive.